Showing 1–32 of 94 resultsSorted by popularity
-
£79.00 (£65.83Â +Â VAT)
Save yourself time and effort and allow our engineers to build test and correctly set your new machine up for you. Larger machines such as chippers and stump grinders take our trained engineers between 1 and 2 hours to correctly build and set up.
When you choose this service
- We will build your machine.
- Fill the machine with oil.
- Lubricate all grease nipples & other appropriate areas.
- Adjust & align drive belts.
- Adjust and tune the engine as appropriate.
- Adjust blade clearances & other working parts to ensure optimum performance.
- Check and test electrical & safety systems.
Your machine will be delivered built & ready to use (some machines will have specified exceptions – these will be specified on the products)
-
£59.00 (£49.17Â +Â VAT)
Built nearly ready to use!
- The engine will be filled to the correct level with the correct type of oil.
- 1 Litre of ASPEN Fuel will be added to the engine.
- The engine will be tested and adjusted for optimal use.
- The gearbox or vibrator case will be filled with the correct level of the correct grade of oil.
- Drive belts & cables will be adjusted & set up for optimal use.
- Any nuts, bolts and fastners will be checked and tentioned correctly.
- The machines functions will be tested.
Please note:
No addition fuel or Lubricants will be supplied.
In stock
-
£39.00 (£32.50Â +Â VAT)
Built nearly ready to use!
- The engine will be filled to the correct level with the correct type of oil.
- 1 Litre of ASPEN Fuel will be added to the engine.
- The engine will be tested and adjusted for optimal use.
- The gearbox or vibrator case will be filled with the correct level of the correct grade of oil.
- Drive belts & cables will be adjusted & set up for optimal use.
- Any nuts, bolts and fastners will be checked and tentioned correctly.
- The machines functions will be tested.
Please note:
Handles and wheels may still need to be fitted due to shipping restictions.
No addition fuel or Lubricants will be supplied.
In stock
-
£39.00 (£32.50Â +Â VAT)
Save yourself time and effort and allow our engineers to build test and correctly set your new machine up for you.
When you choose this service
- We will build your machine.
- Fill the machine with oil.
- Lubricate all grease nipples & other appropriate areas.
- Adjust & align drive belts.
- Adjust and tune the engine as appropriate.
- Adjust blade clearances & other working parts to ensure optimum performance.
- Check and test electrical & safety systems.
Your machine will be delivered built & ready to use.
-
£95.83 (£79.86Â +Â VAT)
Collection box the GAMUL K6 Power Brush
Out of stock
-
£66.20 (£55.17Â +Â VAT)
Set of 3 Stump Grinder Teeth For Outland Tools RC15 Stump Grinder
In stock
-
£1,499.00 (£1,249.17Â +Â VAT)
https://youtu.be/kGgAx8CCJlQ?si=6WcXRvgaDyood4-0
Introducing the Power Brush Sweeper Lumag KM1000 Petrol Yard Sweeper
- Self Propelled.
- 1000mm Wide Brush.
- Angle of the brush can be adjusted.
- Powerful Petrol Engine
- Incudes collector and Plough
- Gearbox with Forward Gears
Did you want to save yourself some time and work? We can build and test your sweeper for you for fee.
Our engineers will spend around an hour building the machine, setting up the blades, adjusting the belts and setting the engine speed. The machine will be filled with oil, ASPEN Fuel and the grease points lubricated. Aside from fitting the intake hopper the machine will be delivered read to use. You can find this service as a product at the bottom of the page or linked here.
Out of stock
-
£39.00 (£32.50Â +Â VAT)
Startup kit!
This kit will provide you with the oil you need to fill up the vibration case or gearbox (depending on the machine) along with the engine oil and a 5L bottle of Aspen 4 alkylate fuel please follow the link to see the beneift of using alkylate fuel.Â
The kit will contain:
- 1 Litre of engine oil
- 5L ASPEN 4 Fuel
Please note you may not need to use the whole bottle of either type of oil for your machine!
Please see below for the list of produsts this kit is suitable for.
In stock
-
£99.00 (£82.50Â +Â VAT)
Built nearly ready to use!
- The engine will be filled to the correct level with the correct type of oil.
- 1 Litre of ASPEN Fuel will be added to the engine.
- The engine will be tested and adjusted for optimal use.
- The gearbox or vibrator case will be filled with the correct level of the correct grade of oil.(Where applicable)
- Drive belts & cables will be adjusted & set up for optimal use.
- Any nuts, bolts and fastners will be checked and tentioned correctly.
- The machines functions will be tested.
- Fill with hydraulic oil.
- Test hydraulic system
- Grease nipples and grease points
- Adjust blades (Where applicable)
Please note:
-No addition fuel or Lubricants will be supplied.
-Chipper hoppers /Â branch logger cannot aways be attched due to shipping restrictions.
In stock
-
£29.95 (£24.96Â +Â VAT)
STARTUP KIT!
This kit will provide you with the oil you need to fill up the vibration case or gearbox (depending on the machine) along with the engine oil and a 5L bottle of Aspen 4 alkylate fuel please follow the link to see the beneift of using alkylate fuel.
The kit will contain:
1 Litre of engine oil
1 Litre of gear oil
1L ASPEN 4 Fuel
Please note you may not need to use the whole bottle of either type of oil for your machine!
Please see below for the list of produsts this kit is suitable for.
Out of stock
-
£1.50 (£1.25Â +Â VAT)
Single Blade Bolt for DC9/DC10/DC12 & DC15 Chipper
In stock
-
£59.00 (£49.17Â +Â VAT)
Startup kit!
This kit will provide you with the oil you need to fill up the vibration case or gearbox (depending on the machine) along with the engine oil and a 5L bottle of Aspen 4 alkylate fuel please follow the link to see the beneift of using alkylate fuel.Â
The kit will contain:
- 1 Litre of engine oil
- 1 Grease gun with cartrige fitted
- 5L ASPEN 4 Fuel
Please note you may not need to use the whole bottle of either type of oil for your machine!
Please see below for the list of produsts this kit is suitable for.
In stock
-
£79.99 (£66.66Â +Â VAT)
Pair of repalcment blades for the DC15 Wood chipper.
In stock
-
£1,195.00 (£995.83Â +Â VAT)
https://youtu.be/Yn7W4x8GcrA?si=31lEPHT-YhQpmXuV
Intoducing the RP130HPC revesible petrol compactor plate.
- Rubber matt incuded
- Wheel kit included
- Compacts in forward and reverse
- 400mm (18″ wide) base plate.
- 25KN of compaction force.
Check out this Lumag vs other brands comparison video.
Only 1 left in stock
-
£59.95 (£49.96Â +Â VAT)
Pair of blade for Outland Tools DC10 Wood Chipper.
In stock
-
£40.50 (£33.75Â +Â VAT)
EB400PRO Extension handles (Set of 4)
In stock
-
£49.95 (£41.63Â +Â VAT)
Pair of blades for Outland Tools DC9 Wood Chipper.
In stock
-
£1,145.00 (£954.17Â +Â VAT)
https://youtu.be/5zTnSa3dIh0
Introducing the Lumag VS80C Trench Rammer.
- Heavey duty
- 1000s sold By Lumag Germany
- 2 Decades of development
- 285mm wide foot
- 196cc Petrol Engine
In stock
-
Sale!
£1,999.00 Original price was: £1,999.00.£1,899.00Current price is: £1,899.00. (£1,582.50Â +Â VAT)
Intoducting the Lumag MD500EK Electic mini dumper
- Powered Tip
- 48v electric drive
- Automatic electic brake
- Narrow access 84cm wide
Did you want to save yourself some time and work? We can build and test your dumper for you for fee.
Our engineers will spend around an hour and a half building the machine, setting up the cables, adjusting the belts and setting the engine speed. The machine will be filled with oil, ASPEN Fuel and the grease points lubricated. Aside from fitting the butt the machine will be delivered read to use. You can find this service as a product at the bottom of the page or linked here.
Out of stock
-
£24.99 (£20.83Â +Â VAT)
Pair of Spare drive belt for Outland Tools DC10 Wood chipper.
Only 2 left in stock
-
Sale!
£2,195.00 Original price was: £2,195.00.£1,995.00Current price is: £1,995.00. (£1,662.50Â +Â VAT)
https://youtu.be/qVuUCnoEgIo
Video showing the Lumag RP300HPC Large reversible petrol wacker plate.
Introducing the Lumag RP300HPCA 262kg reveseble petrol compactor plate.
- Heavy weigh 262KG
- Reverse and froward travel
- Powerful premium engine 389cc
- Easy to start
- 38kn of compaction force.
Check out this video Lumag VS other brands.
Out of stock
-
£1,495.00 (£1,245.83Â +Â VAT)
https://youtu.be/yThzi0z_C2k?si=Ic4Zf4Zfbt0j38Nt
Video showing the Lumag RP160HPC reversible wacker plate.
Introducing the Lumag RP160HPC Petrol reversible compactor plate.
- 30.5Kn of compaction force
- 480mm wide base plate +2 x 60mm extension plates
- 270cc premium Loncin engine
- Forward and reverse compaction
- Integrated protective frame / lift eye
Please check out this video comparing Lumag and other compactor brands.
Only 1 left in stock
-
Sale!
£2,195.00 Original price was: £2,195.00.£1,799.00Current price is: £1,799.00. (£1,499.17Â +Â VAT)
In stock
-
£123.62 (£103.02Â +Â VAT)
Pair of drive belts for the Outland DC15 Wood Chipper
In stock
-
£19.99 (£16.66Â +Â VAT)
Pair of Spare drive belt for Outland Tools DC9 Wood chipper.
In stock
-
£30.00 (£25.00Â +Â VAT)
Single blade for DC5 woodchipper
In stock
-
£249.00 (£207.50Â +Â VAT)
 ENGINE TYPE4-stroke single cylinder OHV petrol engine 25° inclined cylinder horizontal shaft CYLINDER SLEEVE TYPECast iron sleeve BORE X STROKE68 x 45 mm DISPLACEMENT163 cm³ COMPRESSION RATIO8.5 : 1 NET POWER3.6 kW ( 4.8 HP ) / 3600 rpm CONT. RATED POWER2.5 kW ( 3.4 HP ) / 3000 rpm 2.9 kW ( 3.9…
Only 1 left in stock
-
£79.99 (£66.66Â +Â VAT)
Pair of repalcment blades for the DC12 Wood chipper.
In stock
-
£119.99 (£99.99Â +Â VAT)
Startup kit!
This kit will provide you with the oil you need to fill up the vibration case or gearbox (depending on the machine) along with the engine oil and a 5L bottle of Aspen 4 alkylate fuel please follow the link to see the beneift of using alkylate fuel.Â
The kit will contain:
- 2 Litre of engine oil
- 1 Grease gun with cartrige fitted
- 5L ASPEN 4 Fuel
- 5L Hydruailc oil
Please note you may not need to use the whole bottle of either type of oil for your machine!
Please see below for the list of produsts this kit is suitable for.
Only 2 left in stock
-
£399.00 (£332.50Â +Â VAT)
6 way cross knife for the SSA500GHPRORS and SSA500ZHPRORS
Only 2 left in stock
-
£339.00 (£282.50Â +Â VAT)
Out of stock
-
£429.00 (£357.50Â +Â VAT)
Out of stock
